SharkBite
1/2Barbx1/2FPT Adapter
1/2barbx1/2fpt adapter - Description
SharkBite 1/2" Swivel Plastic Nut Faucet Adapter. It connects 1/2" Cross Link Polyethylene Pex Tubing to 1/2" Male Iron Pipe Thread Faucet Shank. Secure the barb end of the fitting to Pex pipe with TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool. Immediately testable to well over 100 PSI. Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead-free compliance, and the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet AB1953 California & VT S152 Vermont low lead restrictions.
- 1/2" Lead-Free Brass Barb Insertx1/2" Female Pipe Thread
- Used for connecting 1/2 in. Cross Link Polyethylene Pex Tubing to 1/2 in. Male Iron Pipe Thread Faucet Shank.
- Secure barb end of fitting to Pex pipe with TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool.
- Immediately testable to well over 100 PSI.
- Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead free compliance & the wetted surface of this product contacted by consumable water contains
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov