Description
The perfect choice for professional landscaper who want the innovative and commercial-grade quality of a Lazer Z zero-turn riding mower, but in a value package. The Lazer Z E-Series zero-turn mower features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. This unit has a Kohler® Command™ Pro engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 60-inch deck. Lazer Z E-Series zero-turn mowers come equipped with a full-suspension seat that enhances operator comfort, leading to less fatigue and increased efficiency.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter
housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires
23 x 9.50-12, 4 ply Super Turf®
Front Caster Tires
13 x 5.0-6, smooth-tread, semi-pneumatic.
Caster Forks
.50" thick caster yoke arms.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners
(3 positions) to customize drive responsiveness. Also adjustable to 2 height
positions.
Parking Brake
Lever-actuated disc brake.
Seat
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material.
Adjustment: Fore and aft from Operators’ Position.
Electrical
12-volt battery with 15-amp alternator.
Standard Features
Engine hour meter and cup holder
UPC
193308119724
Engine Brand
Kohler
Engine Model
CV742
Engine Displacement
747
Engine Series
Command™
Engine Speed
3,750 rpm
Air Filter
Heavy-duty canister air filtration system
Fuel Type
Gas Carbureted
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator
Yes - electronic Sender
Drive
Hydro-Drive
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses,
integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on
filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Engine HP*
25.0
Speed
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward,
0–6.0 mph (9.7 kmph) reverse.
Carb Compliant
No
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck
to maneuver around obstacles, or place in transport position.
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock
system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
PTO Engagement
MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release
Allows unit movement without engine running.
Engine Spec
3037
Width / Cutting Deck
60"
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge
chute and option to bag or mulch.
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
and 7-gauge formed and welded spindle mounting locations for improved strength
and reduced weight.
Blade Tip Speed
Approximately 18,500 fpm.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments
adjustable from operator’s seat.
Blades
3 Blades at 20.50" Length
Width
72.8 in. (184.9 cm)
Length
83.1 in. (211.1 cm)
Height
70.5 in. (179.1 cm)
Curb Weight
1279
Hydro Drive, Simplified
Our hydro drive system has no hoses to leak and just one easy-to-change belt.
Only simple, annual maintenance is required. It also lowers the center of gravity
for improved handling.
Unibody Frame
Our one-piece body frame is a classic case of “less is more.” Because,
fewer parts equal more strength. And, more durability. So, in the interest of
accuracy, the Lazer Z’s unibody frame is actually a case of “less
is way more.”
Less Time At The Pump
Gas-powered E-Series models have a single 8-gallon tank with one fill location.
On-Board Diagnostics
Check vital functions at a glance on the digital screen. An electronic fuel
gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour
meter and OPC safety switch monitoring make troubleshooting easy.
Fewer Grease Points
With just four grease points that only need annual greasing, the Lazer Z delivers
maximum performance with minimum maintenance. Greaseless spindles and only four
grease points on the entire machine.
Ultracut Series 4 Deck
This full-floating deck uses maintenance free spindle with a splined blade driver
to stop bolt tightening on impacts. And, our patented bearing design on idler
arm pivots only needs annual service.
Rear Discharge Deck
Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased
clipping discharge control, reduced noise, and the ability to trim on both sides
of the cutting deck while keeping the operator clean.
Tool-less Belt Removal
Deck and hydro belt can be installed without using any tools.