Description
MOST POPULAR MODEL SOLD!!
For homeowners looking to upgrade to the ultimate commercial-grade zero-turn mower, the Quest S-Series is the obvious choice. Its massive 54-inch Series 2 cutting deck features fabricated and welded construction for ultimate durability and unmatched cut quality. The twin-cylinder Exmark engine powers through tough mowing jobs, while the heavy-duty Hydro-Gear ZT2200 hydro drive system provides zero-turn precision and forward ground speeds of up to 7 mph. The Quest S-Series goes the extra mile, with the advanced productivity, cut quality and long-term durability that Exmark owners expect.
(Mower shown with optional 2-Bag Collection System, Weight Kit and Light Kit. Accessories sold separately.)
This unit comes with a 54" Deck
EQUIPMENT
- Blade Spindles: No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm (.67") diameter spindle shaft.
- Drive Tires: 20 x 10.0-10 Turf Tech TL
- Tractor Frame: Unibody, riveted 10-guage steel.
- Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Front Caster Tires: 13 x 6.5-5 smooth-tread, pneumatic.
- Parking Brake: Automatic-actuated pawl brake.
- Seat: Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
- Electrical: 12 volt battery with 15-amp alternator
- Standard Features: Engine hour meter, cup holder and hitch
- UPC: 193308215693
POWER COMPONENTS
- Engine Brand: Exmark
- Engine Model: LC2P77F
- Engine Displacement: 708
- Engine Series: V-Twin
- Fuel System: Carbureted
- Engine Speed: 3,300 rpm
- Air Filter: Standard Engine Manufacturer's air filter
- Fuel Type: Gas Carbureted
- Fuel Capacity: 3-gallon (11.0-L), single fuel tank with single fill locations
- Fuel Indicator: Translucent Visual
- Drive: Hydro-Drive
- Drive Description: Two Hydro-Gear ZT-2200 hydro static transmissions with no hoses and integrated cooling fans and integrated reservoir
- Speed: Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
- Carb Compliant: No
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety Package: Operator Presence Controls (OPC) and drive system interlock.
- ROPS: Optional Rigid ROPS with seat belt and latch.
- PTO Engagement: Electromagnetic 105-ft-lb clutch
- Drive Wheel Release: Allows unit movement without engine running.
- Casters: 0.25" thick caster yoke arms.
- Engine Spec: K4969
DECK
- Width / Cutting Deck: 54"
- Deck Style: Floating Deck
- Deck Style Description: Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch.
- Deck Construction: 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 4 point suspension.
- Blade Tip Speed: Approximately 18,500 fpm.
- Cutting Heights: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
- Blades: 3 Blades at 18.75" Length
DIMENSIONS
- Width: 65.2 in. (166.0 cm)
- Length: 76.0 in. (193.0 cm)
- Height: 46.6 in. (119.0 cm)
- Curb Weight: 616
ACCESSORIES
Equipment Cover
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit. Fits Quest units.
Jack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
Anti-Blowout Kit
In certain conditions deck blowout can occur. Maximize bagging efficiency and air flow into your collection system hopper with this enhancement kit.
Assist Bar Kit
Designed to help you easily step in and out of your mower upon entering and exiting the machine.
Weight Kit
Enhance your productivity in wet conditions with this weight kit. Each plate weighs 6.6 pounds to give you excellent performance, even with a full load of grass.
Jack Mount Receiver
Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack, attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability. Fits Quest.
ROPS Kit
Sunshade
Mounts and detaches quickly behind the operator's position. Made of heavy-duty, water-repellent canvas for maximum durability. Easily removable for transport. Fits Quest.
LED Light Kit
Engine Maintenance Kit - Exmark V-Twin
Contains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes oil, oil filter, fuel filter, air filter, spark plug and fuel treatment.
Micro-Mulch System
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
Turf Striping Kit
Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
2-Bag Collection System
Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.